Which Way do I Turn the Ratchet to Manually Operation the Ground Control with a 3/8" Drive
Question:
Which way is extent when working from the top 3/8 socket drive. Mine is stuck so I want to make sure I’m going the correct direction.
asked by: Darrell
1
Helpful Expert Reply:
To manually extend the jack on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590 you will need to rotate the crank clockwise from the top of the motor using a 3/8" ratchet and extension. You will not use a socket for this position. Turning it to the right will extend it and left will retract it for you.
expert reply by:
Randy B
1
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 4 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place
- Q&A: Wiring Diagram and Fuse Location for the Lippert Ground Control 3.0 4-Point Leveling System
- Q&A: Wiring Guide for Installing 5th Wheel Landing Gear Motor Switch
- Q&A: Wiring Diagram for 5th Wheel Trailer Landing Gear with Red, Black, White, and Green Wires
- Q&A: Which Lippert Ground Control 3.0 System Is Recommended for a 37' Fifth Wheel
- Q&A: Drawing Schematic of Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0
- Q&A: Dimensions of Lippert Ground Control 3.0 Jacks For Clearance on Keystone Cougar 28SGS
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Wiring Diagrams
- Article: Big Truck Big RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best RV Roof Vents
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride