Wheel Studs for Demco Kar Kaddy

Question

Question:

do you offer wheel studs...i found wheels and lug nuts for demco car caddy if not can you indicate the size i need so I can source elsewhere. Thank you.

asked by: Mike K

0

Expert Reply:

To replace the wheel studs for a Demco Tow Dolly, you need the 12mm x 1-1/2" Replacement Stud # DM28VR.

expert reply by: John R

0

Answer 1

For a wheel lock for your Demco Kar Kaddy SS #DM9713045 I recommend the Blaylock EZ Trailer Wheel Lock - Aluminum - 13" to Small 15" Wheels #BLEZ-300. This is a heavy-duty lock with an aircraft-grade aluminum construction. The adjustable…

view full answer...

Answer 2

I just spoke with my rep at Demco and they said the 8 circle style 14" chrome wheels item #DM11574 that we carry is the only style they have. They no longer offer the 10 circle one you are needing to match your current wheels.

view full answer...

Answer 3

If there are bulges in the tire then this is an indication of a broken band and the tire should no longer be used. Please keep in mind that Goodyear Endurance Trailer tires use a unique fill chart which correlates to the weight of the trailer and…

view full answer...

Answer 4

The Camco RhinoFLEX Sewer Hose part #CAM39761 that you referenced uses standard RV sewer connections like what Valterra would have. On the RV side (the side that would attach to a Valterra fitting) there is a bayonet fitting which is an industry…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Wheel Studs for Demco Kar Kaddy

Product Page this Question was Asked From

Continue Researching