Troubleshooting my Lippert Stabilzer Jack Not Working Motor Runs Stabilizers Don't Move

Question:

I have a FR TT. The rear stabilizer will extend and retract manually with no problems. The motor is working but it will not engage with the stabilizer. Can you advise on what to look for to identify the problem?

asked by: Tom N

Expert Reply:

On your Lippert Components High-Speed Power Stabilizer Jack part # LC298707 I would look at the shear pin that is at the shaft of the motor. If it was put to too high of a pressure it likely sheared to prevent damage.

The drive screw attaches to the motor and runs though the ends of the arms to allow operation. Those connections are very solid so it is very unlikely that is where the problem lies. Your motor is also running as you said so it has to be between those two points.

expert reply by: Randy B