2020 Toyota Highlander Limited Hybrid 2WD Tire Chain Recommendation.

Question

Question:

Will the KONIG XB-16 fit 235/55R20 tires? I dont see that tire listed in tire application list.

asked by: Michael

0

Expert Reply:

We have a good solution but the Konig Standard Snow Tire Chains part # TH01571250 are not confirmed to fit your 2020 Toyota Highlander with 235/55R20 tires.

Instead use the Konig Self-Tensioning Snow Tire Chains part # TH2004705255 this is the appropriate size for you tire.

expert reply by: Randy B

0

Answer 1

I have another option for you, but at this time we do not have cable tire chains that are confirmed to fit the 235/55R20 tires on your 2020 Toyota Highlander. Instead I recommend taking a look at the Konig Self-Tensioning Snow Tire Chains…

view full answer...

Answer 2

Sometimes there is overlap between tire chains sizes, but for the tire size of 245/60-18 that you have installed on your 2017 Ford Explorer the Thule XB16 tire chains you'd need are the part number #th01571250 and not the part #TH01571265 that…

view full answer...

Answer 3

One big difference between the XB16 chains like part #TH01571245 and XG12 chains like the #TH01594245 is the link size which is hinted at in the title of the chains. The XB16 requires 16 mm of clearance and the XG12 only requires 12 mm. They are…

view full answer...

Answer 4

We get all of our fit info from the tire chain manufacturers. If they changed a fit and list the 250 #TH01594250 now as the correct fit this would be the chains to use. I checked with Konig and this is the correct size.

view full answer...

Answer 5

The Winntec 6000 regulator that you referenced is a low pressure regulator like what the JR part #37207-31525 you referenced. If it's a recall I'd imagine they'd replace what you have with something that would work but if not the…

view full answer...

Answer 6

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. Since the figure you came up with doesn't match any of…

view full answer...

Answer 7

I am far from an expert on snowmobiles but one would have to think such a large truck with the correct tires and chains would be able to make it through up to 2' of snow assuming you have clearance on the vehicle. In regards to the type of tire…

view full answer...

Answer 8

Thanks for the photo, and in regards to clearance, it is referring to requiring 12mm of clearance on the inside of the tire for the Konig chains that fit your 2021 Volkswagen Atlas with 255/50R20 tires: - Konig Self-Tensioning Snow Tire Chains…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I reached out to my contact at Lippert and they said that it sounds like you just aren't holding the 4 buttons for the reset long enough. It requires 5 seconds, but many people will count to 5 a little too fast and the system won't reset. He…

view full answer...

Answer 11

On single axle trailers typically you put the hanger spacing right at 1/4 of an inch shorter than the leaf spring length from eye to eye center. So if you were using the leaf spring part #e54SR that you referenced which measures 25-1/8 inches long…

view full answer...

Answer 12

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

2020 Toyota Highlander Limited Hybrid 2WD Tire Chain Recommendation.

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching