What are the Inside Dimensions of the Dutton-Lainson Winch Cover, # DL24051
Question:
need open dimensions of cover: height, depth, width. Is there a draw rope at the bottom? I intend to use this as a cover for 2 driving lights mounted close together. Purpose is to prevent catching/ damage going through car washes.
asked by: R M
Expert Reply:
I went out to the warehouse and measured the Dutton-Lainson Winch Cover, # DL24051. On the inside from left to right it is approximately 11 inches. Front to back it is approximately 7-1/2 inches. And the inside height is approximately 8 inches. There are some tolerances since the cover is flexible. There is also a draw rope at the bottom. I am not certain if you would be able to get the cover tight enough to withstand a car wash without additional support like a bungee cable. I made a short video for you also.
Product Page this Question was Asked From
Continue Researching
- Q&A: Clutch Does Not Lock on the Dutton-Lainson TW4000 StrongArm Electric Winch
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Steel vs. Aluminum Ball Mounts
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Mounting Plates for Dutton-Lainson StrongArm Electric Trailer Winch, # DL25200
- Q&A: Dimensions of the Dutton Lainson Adapter plate part # DL24059
- Q&A: Can Dutton-Lainson TW4000 StrongArm Electric Winch Serve as Boat Strap When Traveling
- Q&A: Is The StrongArm Electric Winch 9k Worth Replacing A PowerWinch 912
- Q&A: Can the Dutton-Lainson Strong Arm Winch Be Mounted to a Boat Trailer Upside Down
- Q&A: Where Should a Dutton-Lainson Strong Arm Winch be Installed on a Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Performance Chips and Modules
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: Trailer Jacks