Detailed Dimensions Of The Square A-Frame Jack # TJDA-5000S

Question:

Hello! Im looking to use one of these jacks in a maintenance stand application for my company. I was wondering if you have a CAD model I could use as reference, or if you could send me some detailed dimensions for it? Im particularly interested in the dimensions of the A-frame plate and where it sits relative to the top and bottom of the jack. The distance and spacing of pin holes on the leg would be helpful too. Thank you!

asked by: John M

Expert Reply:

When the jack # TJDA-5000S is fully retracted you will have a measurement of 7-1/8 inches from the bottom of the mounting plate to the bottom of the foot plate and when fully extended that measurement is 22-3/8 inches. From the top of the jack to the bottom of the mounting plate is 17-5/8 inches.

The jack has a total travel distance of 15-1/4 inches. The dropleg is going to add an additional 13-1/2 inches of travel and can be adjusted in increments of 3-3/8 inches. I've made a diagram for you, it's not as intricate as the CAD model but it's the best I can do for you.

expert reply by: Adam E