Wiring Trailer Lamp With Red and Black Wires
Question:
I have on the right side tail lamp red and black wires. From there I have 2 Brown wires that attaches to green wire Ang green with yellow stripe wire
asked by: Wendell S
Expert Reply:
On the taillight itself, the black is typically the running lamp and the red is usually the brake lamp and turn signal. As far as the wiring on your trailer goes, the brown wire is for the running lights, the yellow is for the left turn signal/brake lamp and the green wire is right turn and brake lamp. If the lamp doesn't have a dedicated white ground wire, it will get its ground connection through its connection to the trailer frame.
I've linked to some trailer wiring diagrams that you'll find helpful.
Product Page this Question was Asked From
Standard Trailer Light Kit with 25' Wire Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Red and Amber
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: 2023 Best Gifts for RVers & Campers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Dimensions Of Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch C60633
- Article: Trailer Maintenance Schedule
- Q&A: The Function of the Auxiliary 12-Volt Connection on the 7-Way Trailer Connection
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: ST205/75/15 Spare Wheel And Tire Combo For A 1974 Pull Behind Camper
- Q&A: GloBrite 126R/126Y Red Replacement Light
- Q&A: Roller Material on Gorilla-Lift Replacement Roller Assembly Part # GMNR925
- Q&A: How to Rewire an Old Cattle Trailer
- Q&A: Damaged Caused to Travel Trailer Brake Drums and Bearings by High Temperatures
- Article: How to Measure for Trailer Hitch Drop