Information Needed to Pick out a Base Plate Kit to Flat Tow a 2000 Chevy Tahoe  

Question:

Expert Reply:

In order to pick out the correct base plates for a 2000 Chevy Tahoe you are going to need to know the following information. You will need to know if the tow hooks on your vehicle attach externally or internally of your frame, the payload of your vehicle (1/2 ton or 3/4 ton) and whether or not you have 4 wheel or 2 wheel drive.

Once you know that information check out the link I provided that will allow you to select which model you have and the correct base plate kits will be left for you to select.

There are several other components needed to flat tow a vehicle. If you do not have a tow bar I would recommend you get a RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with safety cables, wiring and quick disconnects also.

There are several options for lighting, check out the FAQ article I attached that shows all of the different options and will help you pick out the correct kit for your setup based on your needs.

And finally, most states now require a supplemental braking system on the vehicle being towed. The easiest to install and use is the Roadmaster Even Brake portable proportional braking system, part # RM-9400. This unit activates the brakes on the vehicle being towed in proportion to how much the RV is braking. This is the safest type of braking action, and it reduces wear and tear on the RV and towed vehicle brakes.

You will also want to check the vehicle owners manual for additional information on flat towing the vehicle. Some vehicles require an axle disconnect, drive line disconnect, transmission lube pump, or free wheeling hubs in order to be flat towed.

expert reply by: Jameson C

0