Any Leaf Springs Designed for Boat Trailers Used in Salt Water
Question:
Are there any suspension springs made for use on boat trailers that are used in salt water? Thanks in advance!
asked by: Rob H
Expert Reply:
They do not have leaf springs that are specifically designed for boat trailers that are used in salt water. Since the leaf springs will flex there is no kind of plating or coating that will stay attached to the spring. Also, the process that is used to plate or coat a part can use high temperatures that could cause premature failure of the spring.
As long as you get the leaf springs with the correct weight rating and the correct measurements to fit your boat trailer you should have no problem using them in salt water.
It is recommended when using your boat trailer in salt water to spray off the trailer immediately after use in salt water to help protect and prolong the parts on the trailer. Some people have used a spray rust inhibitor to slow down any rust from forming on the parts. I would recommend to check with other boaters that boat in salt water and see what they might be using, if anything, to help with protecting their boat trailer suspension.
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 17-3/8" Long - 1" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 17-3/8 Inch Long
- Tandem Axle
- Triple Axle
- Dexter
more information >
Continue Researching
- Video: Review of DeeMaxx Trailer Brakes - Replacement Slip On Rotor - DE77VR
- Shop: DeeMaxx Ceramic Brake Pads with Stainless Steel Backing Plates - 3,500 lbs to 6,000 lbs
- Shop: DeeMaxx Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Maxx Coating and Stainless Steel - 6,000 lbs
- Shop: Replacement Saltwater Rated Disc Brake Pads for Dexter Brake Calipers - 1 Axle Set
- Shop: Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Stainless Steel - 5,200 lbs - 6,000 lbs
- Search Results: hydraulic brake hose
- Search Results: trailer disc brake pads
- Shop: DeeMaxx 12" Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Q&A: Recommended Replacement Stainless Steel Caliper for Kodiak 225 Series with 12 Inch Rotors
- Search Results: kodiak brake pads
- Shop: Brake Controller
- Search Results: deemaxx brake pads
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Search Results: trailer brake controller
- Video: Choosing the Right Brake Controller
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: brake controller
- Search Results: trailer brakes
- Article: Brake Controller Installation: Starting from Scratch
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: DeeMaxx Disc Brake Kit Review