Solution for Difficult to Turn Handles of Demco 5th Wheel Rail Adapter Ram OEM 5th Wheel Rail Kit
Question:
Is there a way to adjust the locking arms? Once I tightened the 4 bolts on each puck it is extremely tight and difficult to remove without loosening all bolts at each arm.
asked by: Wallace D
0
Expert Reply:
Demco recommends greasing the pins of the # DM6099 that insert into the hitch prep package of your truck to allow it to remain easier to install and remove. They also state that if the handles are too hard to turn to remove the nut on the bottom of the handle and remove one shim from the top bushing.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs
- Accessories and Parts
- Fifth Wheel Installation Kit
- Adapters
- Rail Adapter
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Ram Trailer Tow Prep Package
- Q&A: Will The B&W Patriot 5TH Wheel Fit On Demco Adapter Rail For a 2024 Ram 2500?
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: Ram Truck Factory Puck System for 5th Wheel Hitches
- Q&A: Recommended Suspension Enhancement For A 2022 Ram 2500 Towing A 5th Wheel Trailer
- Q&A: Solution for Rough Unloaded Ride Caused by Jounce-Style Springs on Ram 2500
- Q&A: Adapter For PullRite SuperGlide For 2021 Ram 2500 With Factory Puck System
- Q&A: Are Shorter Arms Available for the B&W Companion To Lower the Trailer Nose
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Determining Trailer Tongue Weight
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Which Hitches are Made in the USA