Weight Distribution System for 7,000 lb Enclosed Trailer
Question:
I have a 2014 Toyota Tundra CrewMax. I tow a 7000GVW enclosed trailer and looking for the correct weight distribution system. Can you point me in the correct direction? I do a 1,000 mile trip a couple times a year and definitely need something. I appreciate your time. Thanks.
asked by: Jake M
Expert Reply:
The Timbren Rear Suspension Enhancement System # TTORTUN4 you were looking at would give some additional suspension support, but I recommend going with a weight distribution system such as the Reese Steadi-Flex Weight Distribution Hitch with Sway Control # RP66560. This system gives you a lot more stability and reliability than just using a suspension enhancement, and also gives you sway control to limit side-to-side movement of your trailer. It is also designed to allow for easy adjustment of the head assembly, so it eliminates the hassle of adding and removing washers from within the assembly to get the perfect setting like with other models.
This WD hitch can be used for tongue weights from 600 - 1,200 lbs. Tongue weights usually fall in at around 10-15 percent of the gross trailer weight, so this hitch should be suitable for your application, but I recommend you check and make sure you find your trailer's loaded tongue weight. This is because using a WD hitch that is way over-rated for your trailer can lead to a poor ride quality. I've attached an article below to help you find your trailer tongue weight.
Products Referenced in This Question
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Extra Heavy Duty
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Height of the Rubber Spring of the Timbren kit part # TTORTUN4 and # TORTUN4L
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Recommended Suspension Enhancement System for a 2023 Ford F-150 Raptor
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Article: Determining Trailer Tongue Weight
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Spare Tire for Cargomate Trailer with 15 Inch Wheels
- Q&A: Overall Height of Timbren Suspension Enhancement Springs # TTORTUN4 for a 2010 Toyota Tacoma
- Q&A: Fit & Height of Timbren Suspension Enhancement on 2019 Toyota Tacoma 4WD
- Article: Trailer Wiring Diagrams
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: My Trailer Hitch Doesn't Fit