Recommended Suspension Enhancement for 2017 Toyota Tacoma with 2" Lift

Question:

Will the 1000 lb sumo springs be a good option for me? I have installed a 2” lift and Dakar leaf springs in rear. The factory bump stops barely even touch with the truck sags when hauling wood or trailer. I want bump stops that will touch mainly only when loaded down to keep the leaf springs from stressing to much. I also keep a 200 lb topper on the truck k always. I was looking at the timbren ses also. Thanks.

asked by: Tyler B

Expert Reply:

I have a solution for you, but because SuperSprings does not offer a lift spacer for the SumoSprings, using the # SSR-612-47 may not be the best solution in this case because of your lift. Instead, I recommend using the Timbren # TTORTUN4L which can be used with lift spacers like the # A25723-90AH00, which will help compensate for your 2" lift. The Timbren system won't effect your unloaded ride quality and allow the springs ample room for movement.

I've linked some brief review and installation videos on these for you to have a look at, if you haven't already.

expert reply by: Erik B