Can Reese Weight Distribution System # RP66559 be Used in Rise and Drop Position
Question:
Hi - with the Reese Weight Distribution Hitch - RP66559, can I flip the hitch bar for more ball height, so does it do both drop and rise?
asked by: Elias S
0
Expert Reply:
Yes you can use the shank that comes with the Reese Weight Distribution System # RP66559 in the rise position if you want. The max rise it can provide is 8-3/4 inches and the max drop is 4 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Weight Distribution Recommendation for 6,000 lb Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Quieter Weight Distribution System Recommendation for Trailer w Unloaded Tongue Weight of 490 lbs
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Weight Distribution Hitch With Sway Control for Jayco X20E
- Q&A: Will Curt Hitch Ball # A-6 Work on Reese Steadi-Flex Weight Distribution System RP66559
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for a 2,500 lbs Travel Trailer
- Article: Trailer Wiring Diagrams