Wiring a Third Brake Light and Dome Light into Truck Bed Cap on a 2006 GMC Sierra 2500HD

Question:

im looking at this post on how to wire the interior lights and third brake light for a canopy, it mentions the provided link with step 3 figure B, but I dont see the provided link. It would really help me. Please let me know if I can still find this walkthru.

asked by: John B

Expert Reply:

I believe the link you are talking about is in another question and answer page and it is on the right hand side of the page. I have included it here for you too. I have also included the picture.

For the remaining wiring I will reiterate what my colleague said: If you will take a look at the wiring harness up above the spare tire, you should find the connector that the 7-way plugs into. If you trace the loom back just a bit, you will find a light blue wire that is used for the 3rd brake light for your truck cap. If you will follow the provided link, see Step 3 figure B. This photo will show you the location of this wiring harness above the spare tire.

For the interior dome light, there are two common methods both of which will require a switch. You can either tap the feed for that dome light into the tail light circuit, which means that the light will only work when the running lights or headlights of the vehicle are switched on, or it can be tapped into the 12-volt feed that runs to the 7-way. I would recommend using that 12-volt feed, so that you will not need to turn on the head lights to activate the circuit.

expert reply by: Michael H