Difference Between Fantastic Fan Upgrade Kits FV807357 and FV807359

Question

Question:

what is the difference between FV807357 and FV807359 that are both available on your website. One is cheaper than the other but they look identical, at least to me. Thanks

asked by: Andre

0

Expert Reply:

The big difference is the corners of the main panel of the # FV807357 are cut out with small section to allow access to mounting hardware and the # FV807359 instead does not have this area cut out. So you'd want to look at your vents to see if you need the cutouts or not.

expert reply by: Jameson C

0

Answer 1

We do carry the Fan-Tastic Vent 7350 Series Upgrade Kit #FV807359 that you are looking for! It was temporarily deactivated but we confirmed it is a good part number and still supported by Fan-Tastic Vent in part thanks to your question!

view full answer...

Answer 2

I have some good news for your wallet because I reached out to the manufacturer, Dometic, who told me you can upgrade your 2250 Series Fan-Tastic Vent Roof Vent #FV802250 with the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit #FV807357 to get the…

view full answer...

Answer 3

Fan-Tastic vents does have a powered roof vent that clamps on for install with the part #FV801208 which would work great for you. The part #FV807350 attaches using screws though.

view full answer...

Answer 4

I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will…

view full answer...

Answer 5

The included hardware of the Fan-Tastic Vent Upgrade kit part #FV807357 that you referenced does screw to the garnish that's already installed which is what clamps to the roof opening. While online install instructions aren't…

view full answer...

Answer 6

Thank you for the info and pictures! I reached out to my contact at Fan-Tastic Vent and found that your solution is to use the Fan-Tastic Vent 7350 Series Upgrade Kit #FV807359. Your model 6500 is an older version which is no longer in production.…

view full answer...

Answer 7

The Fan-Tastic Vent 7350 Series Upgrade Kit - High/Low Style Base part #FV807359 rain sensor can be disconnected from the circuit board without affecting the functionality of the fan or remote. I have attached a photo of the rain sensor. There is a…

view full answer...

Answer 8

The Fan-Tastic Vent 7350 Series Upgrade Kit, #FV807359, is for both High and Low Style Bases that measure roughly 14-1/4" x 14-1/4"; this meets most typical RV vents. This designed to replace Dometic P/N 807359 and most any other with a…

view full answer...

Answer 9

You can use the part #FV807359 as a way to upgrade your Fan-Tastic vent setup to one that has the auto up and down as well as have a thermostat.

view full answer...

Answer 10

That does not sound fun to deal with, I have a solution for you though. It sounds like either the remote needs to be reset or you do not have proper voltage going to the unit. To reprogram the remote hold it at least 12 inches or closer to the…

view full answer...

Answer 11

The install of the Fan-Tastic Vent 7350 Series Upgrade Kit #FV807359 can be done from the inside of the RV. The remotes are the same frequency but the great thing is that they are very directional and the range is pretty limited. So if you pointed…

view full answer...

Answer 12

We do have a Fan-Tastic lift arm with the roller on the side of the arm that you are looking for with the part #FVK8011-05.

view full answer...

Difference Between Fantastic Fan Upgrade Kits FV807357 and FV807359

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching