Timbren Axle-Less Trailer Suspension System for Trailer that Has Brakes with 6 Bolt Hubs
Question:
Afternoon, I have a military trailer to be precise an M105A2 and I have already gotten rid of a lot of weight, the next project is the axle and the wheels. My ultimate goal is to have a semi off road camper/trailer maybe with a tent on the roof and to use the bed of the trailer to haul gear so Im not talking that much weight. I would really like to wheels that are the same bolt pattern as my 2008 Toyota FJ Cruiser so that I only have to carry 1 spare tire. Now for the interesting thing, do you believe that Axle-less suspension system would work on my trailer and if it does would you recommend which one I should be looking more at. I would like to have electronic brakes and the ability to run off road tires with a 6 bolt Toyota pattern and I think Ill need at least 4inch lift. Thanks
asked by: Phil M
Helpful Expert Reply:
The Toyota 6 lug bolt pattern is the same 6 bolt pattern that trailers use of 6 on 5.5 inch so what you wanting to accomplish with a Timbren Axle Less setup is possible. The part # ASR3500S06 is the best option as it has a 4 inch lift built into it. For hub/drums you'd want the part # 84656UC3-EZ and then for brake assemblies # AKEBRK-35-SA would be what you'd need for both sides of the trailer and you'd be set.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: Help Determining Wire Colors of Trailer Wiring for Installing New 7-Way
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Q&A: 2020 Aliner Expedition Suspension Upgrade for Dexter 3,500 lb Torsion Axle
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: How to Identify Trailer Axles
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: Overview of Lubricating Grease
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Raise Your Travel Trailer Height