Is Trailer Ball Included With Curt TruTrack Trunnion Bar Weight Distribution System Torqued
Question:
1. My system came with the ball already attached does that mean the ball is torqued at the right ft. lbs.? 2. When buying a torque wrench should I buy a 1/2 inch or a 3/8 torque wrench? Because the L- bracket both nylock nut #8 needs 25ftlbs and the head fasteners 3/4inch bolts needs 200 ft. lbs.
asked by: Vicky P
Expert Reply:
You won't need to torque the ball, it will already be installed and properly torqued. As far as which size drive to get, typically the larger the drive, the higher torque ratings the wrench can handle. From what I've seen, a 3/8 inch drive torque wrench won't have the necessary capacity to get you to 200 ft lbs.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Q&A: Weight Distribution System For Hauling a Dump Trailer
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?