If Trailer Load Weight is Gone Can Weight Distribution System be Left Installed
Question:
Sometimes my trailer has to be empty while going to get load. Will it hurt anything to use Reese RP66560 in that condition? Thanks
asked by: Jeff P
0
Expert Reply:
If you have the Reese Steadi-Flex part # RP66560 set up for the tongue weight of your trailer loaded your best solution would be to have the spring bars disconnected when not loaded. Having too much spring bar tension would give you a really harsh ride so the easy solution is disconnect them when not in use.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Q&A: Surge Brake Compatible Weight Distribution System Recommendation
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Most Popular Wheel Bearings
- Q&A: Recommendation for Upgrading From Fastway Weight Distribution Hitch
- Q&A: Maximum Towing Capacity of 2014 Chevy Traverse
- Q&A: Correct Gen-Y Pin Box to Replace a MORryde RPB72-1716
- Q&A: Best Towing Mirror Extensions For a 2024 GMC Sierra 1500
- Q&A: Can You Back Up Trailer with Reese Dual Cam II Weight Distribution System Installed