Parts Needed to Flat Tow a 2011 Jeep Wrangler Behind an RV

Question

Question:

2011 jeep wrangler what do i need to tow behind rv conplete kit base plate and blue ox bar

asked by: Benny

0

Expert Reply:

The first thing you will want to do is consult the vehicle owners manual to determine how the vehicle should be towed and if any additional equipment or special procedures are required.

There are 5 items you will need to flat tow a vehicle. First you will need base plates. There are several options for a 2011 jeep Wrangler depending on the bumper you have. I have included a link to them for you.

The next item you will need is a tow bar. If you go with Roadmaster base plates, the most popular options is the Falcon 2, # RM-520. I have included links to the instructions and a video review for you. If you go with Blue Ox base plates, the compatible tow bars will be listed on the product page.

Next you will need safety cables like # RM-643. The coiled design keeps the cables off of the ground. Some tow bars come with cables and you may not need to add them. Other tow bars have safety cable channels and require straight cables like # RM-645. The product pages for the tow bars will say if the tow bar comes with cables or if it has channels that require straight cables.

The next part is lighting. I recommend the bulb and socket kit, # RM-155, because it does not require cutting into the vehicle wiring.

The last item you will need is supplemental braking. Most states now require a supplemental braking system on the vehicle being flat towed. The easiest system to set up and use is the Even Brake # RM-9400. This is a proportional system that applies the vehicle brakes in proportion to how much the towing vehicle is braking. Proportional systems are the safest way to stop and they reduce wear and tear on both vehicles.

I have included a link to our series of FAQ articles on flat towing for you. You will want to consult the vehicle owners manual to determine if you can flat tow this vehicle and on the proper procedure for flat towing.

expert reply by: Michael H

0

Answer 1

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 2

I checked the owner's manual for the 2000 Chevy Tracker and you can flat tow 4x4 versions of the 2000 Chevy Tracker! See pages 4-44 and 4-45 in your manual for additional information. To flat tow the vehicle you will need base plates, a tow bar,…

view full answer...

Answer 3

I attached a picture for you to use as a guide for wiring in your trailer's 4-way wiring to a 7-way socket connector. The yellow wire is the left turn/stop circuit that you have out of the connector.

view full answer...

Answer 4

Hey Michael, we do have a Roadmaster base plate kit that fits your 2006 Chrysler PT Cruiser GT turbo with the part #278-1. If you are looking for just the removable arms you'd need the part #RM-ARMS instead.

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

From what I was seeing in the online owner's manual for a 2020 Honda Civic it looks like you can't flat tow it, but the manual said that using a tow dolly is acceptable for emergency towing so you may be able to use a tow dolly for your…

view full answer...

Answer 7

Since you already have the tow bar the other items you will need are the base plates, safety cables, and light kit to tow your vehicle behind a RV. If your tow bar does not have the support bar that goes from side to side and attaches to the two tow…

view full answer...

Answer 8

Hi Garry; we have exactly what you are looking for regarding wiring for your 2015 Kia Soul for flat towing: - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 - Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25

view full answer...

Answer 9

In addition to the Roadmaster Tracker #RM-020 tow bar you referenced, you will need a base plate kit, safety cables, wiring and depending on the states you will be traveling in, a supplemental braking system. The Roadmaster #278-1, which fits all PT…

view full answer...

Answer 10

Yes, RoadMaster XL Brackets part #278-1 will fit your 2009 Chrysler PT Cruiser. I have included a link to a page where you can find our Base Plate fit guide. It is just below the yellow highlighted text. I called my contact at RoadMaster and they…

view full answer...

Answer 11

Thanks for sending a picture! I went to our warehouse to measure the brackets on the Blue Ox base plate #BX1126 to provide you the measurements you are needing. The bottom edge of the bracket measures 10-inches and the top edge measures 5-1/4 inches.…

view full answer...