Compatibility of Trailer Suspension Hanger on 2 x 2 Inch Frame
Question:
will this bolt on fit on a 2inch x 2inch square steel tubing frame?
asked by: Sammy
0
Expert Reply:
The CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On # CE14035G40 measures 3 inches wide and the center on center bolt holes are 1-5/8 inches. Because of this it will not fit and you would instead need the weld on Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole # 28-5.
expert reply by:
Jason S
0
Products Referenced in This Question
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Accessories and Parts
- Trailer Suspension Parts
- Brackets
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Search Results: double eye
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only
- Shop: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Review of CE Smith - Trailer Leaf Spring Suspension - CE14035G40
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Q&A: Replacement Hangers for Single Axle Trailer
- Video: Review of etrailer Trailer Fenders - Single Axle Fender with Backing Plate - HP36VR
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - 28-5 Review
- Article: Double-Eye Trailer Suspension System Review
- Search Results: fender
- Search Results: hanger
- Search Results: slipper
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Q&A: What Size Bolt-On Leaf Spring Hangers Are Available
- Q&A: Can Leaf Spring Shackle Straps Be Installed Between Leaf Spring and Front Spring Hanger
- Q&A: What Is the Hole Spacing of the Leaf Spring Hanger 28-5
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Q&A: How to Mount Redline Single-Axle Trailer Hanger Kit Part # APS4 To Trailer Frame
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS4 Review
- Search Results: military discount
- Shop: Fifth Wheel Hitch
- Search Results: leaf spring hangers