Does Kenda 4.80-12 Trailer Wheel and Tire Center on Pilot Diameter of Wheel or Lug Nuts
Question:
I have a hub 4 bolt, the center hole is 2 3/8 inch but the kenda rim hole is 2 3/4 and the hub used bolts will it adjust it self once bolts go on?
asked by: Lou
0
Expert Reply:
The trailer wheel part # AM30620 that you referenced centers on the lug nuts so as long as it's pilot diameter is larger than the bore of the hub (like in your case) it will fit and work great while being perfectly centered.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Article: Pintle-Hitches
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Can a 145R12 Tire Replace a 4.80x12 Bias Trailer Tire Size
- Q&A: Recommended Replacement 4.80x12 Wheel/Tire With Higher Speed Rating for Harbor Freight
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: Trailer Hitch For 2024 Toyota RAV4 With Best Bumper Clearance & Ground Clearance
- Article: Measuring a Trailer Tire
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings