bing tracking image
Q & A Icon

Installation of the Door Check and Hold Back part # 337BM2395AA11  

Question:

I just received these brackets. They look to be of high quality. What screws would you recommend I use to install them? Thanks, Doug Schulte

0

Expert Reply:

The Buyers Products Door Check and Hold Back part # 337BM2395AA11 can be installed with many types of hardware depending on the surface you're mounting it to.

When mounting to a very heavy material like very thick ply wood or a thicker steel using some #12 or #14 self tappers would be a fine solution. If you're going into thinner material You will need to use bolts with large washer to spread out the energy over a greater area. There are no written instructions for this because there are so many different materials it can be mounted to.

expert reply by:
0
Randy B

Michael C.

7/6/2020

Not sure exactly how to install is there a video I can see to install this is a short spring go to the inside or outside no directions really don't know how to install it

Etrailer Expert

Chris R.

7/10/2020

Check out the answer page I linked below - it does a nice job of showing where the spring actually gets installed. Unfortunately we don't have any install videos for this product.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>