JT's Strong Arm Stabilizer Replacement Outer Stabilizer and T-Handle

Question

Question:

I need a JT arm 25inch outer sleeve and Tinch handle. can you help

asked by: David

0

Expert Reply:

The Replacement T-Handles for JT's Strong Arm Jack Stabilizer Kits - Qty 2 # LC314594. The outer sleeve you are seeking is Replacement Outer Stabilizer for JT's Strong Arm Jack Stabilizer - 1-1/4" OD - Qty 1 # LC191014.

expert reply by: Jason S

0

Answer 1

There are a few different styles of scissor jacks, but we definitely have some that can be used to replace the 5K jack on your 2020 Forest River Salem 33TS. For your application I recommend going with the Leveling Scissor Jack #JSC-30-IND which has…

view full answer...

Answer 2

For the JT's Strong Arm Jack Stabilizer Kit #LC191024 the Replacement Outer Stabilizer #LC191014 will be the one you are looking for. The T-Handles #LC314594 are sold as a 2 pack. We also have the Replacement Swing Bolt Kit #LC314595 if that was…

view full answer...

Answer 3

We do have the T-bolts, #LC314594, and I believe you also need the shorter swing bolts, #LC314595. But I checked with Lippert and the actual Strong Arms are only available in the kits. For trailers over 58 inches between the landing gear you would…

view full answer...

Answer 4

Yes, I went out and checked a Lippert Components JT's Strong Arm Jack Stabilizer Replacement T-Bolts #LC314594 we had in stock and the threads are 3/8 inch coarse.

view full answer...

Answer 5

Sounds like you are looking for replacement T-handles for your JT's Strongarm stabilizers like with the part #LC314594.

view full answer...

Answer 6

For the JT's Strongarm kits we do have replacement handles with the part #LC314594.

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

JT's Strong Arm Stabilizer Replacement Outer Stabilizer and T-Handle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching