Correct Thule TracRac SR Sliding Ladder Rack for a 2012 Ram 2500 6.5 Bed with Tonneau Cover

Question

Question:

Does this product fit a 2012 Ram 2500? Also, does this work with a bed cover?

asked by: Bill C

1

Helpful Expert Reply:

The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2012 Ram 2500 6.5' Bed is part # TH43003XT-501. In regards to compatibility with a tonneau cover, so long as the stake pockets are free there won't be any issues.

expert reply by: Conner L

1

Answer 1

Yes, since your tonneau cover mounts between the bed sides and you do not have a toolbox on your 2015 Ram 2500 you can install the TracRac SR sliding ladder rack #TH43003XT-501. This ladder rack has rails that the uprights slide on. The rails mount…

view full answer...

Answer 2

The Rhino Rack roof racks all have the standard 165 lb weight capacity for roof rack crossbars but if you didn't mind something that sat up a little higher we have the Yakima Outpost HD Overland Rack part #Y01152-5855 which has a 300 lb weight…

view full answer...

Answer 3

The TruXedo Elevate Truck Bed Rack System #TX46NV hasn't been tested with Access tonneau covers, but has been confirmed to work with numerous other inside-the-bedrail style tonneau covers so I don't see you having a problem with fitment. In…

view full answer...

Answer 4

We have just what you need. Since you have a BAK Revolver tonneau cover we do have sliding ladder racks that will fit with it and your 2018 Ram 2500 well. The Revolver is one of the very few tonneaus we know can fit with ladder racks. If you have a…

view full answer...

Answer 5

There likely is some overhang towards the bed with the Thule TracRac SR #TH43003XT-501EX installed on your 2022 Ram 2500. This is definitely designed to fit your truck and we've found there to be a limited number of tonneau covers compatible with…

view full answer...

Answer 6

I attached a picture that shows an exploded diagram of how the TracRac Ladder rack part #TH43003XT-501 installs to a truck bed. Basically the rails install down into the stake pockets of the bed rails to provide a secure attachment. This is one of…

view full answer...

Answer 7

Since you have the BAK Revolver X4 Hard Tonneau Cover like the BAK79213 on your 2020 Ram 2500, the only ladder rack confirmed to fit is the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43003XT-501 if you have a 6-1/2' bed without RamBox, or…

view full answer...

Answer 8

Based on my research the Undercover Armor Flex Flip Up tonneau cover that fits your 2016 Ram 2500 with a 6'4" bed installs inside the bed rails, so the compatible ladder rack you can use will mount on top of the bed rails, and is from Thule:…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Correct Thule TracRac SR Sliding Ladder Rack for a 2012 Ram 2500 6.5 Bed with Tonneau Cover

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching