Installation of Backup Camera or Observation Camera
Question:
I need to splice into the lights what wire is the reverse positive and which one is the negative there is only 3 wires white black and green
asked by: Kevin
Helpful Expert Reply:
When wiring your backup camera, you can splice the camera power into the reverse light signal or you can splice into the running light circuit to give you an observation camera that gives you the view at any time.
To determine which of your wires is the positive power wire, you will need to use a circuit tester like # PTW2992. If wiring your reverse light circuit you will need to shift into reverse and then check for power using the circuit tester. If wiring through your running/parking lights, you can turn on the lights and use the circuit tester to determine which wire is power.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Is the Roadmaster Stop Light Switch Needed for the Demco SBS Stay-IN-Play DUO
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Flat Towing Set Up for a 2023 GMC Canyon Denali
- Q&A: Can The Demco Stay-In-Play Be Transferred From One Vehicle To Another?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Will Demco Stay-IN-Play DUO Not Work if Battery Dies
- Q&A: Can Reverse Lockout Solenoid Click and Still not Function
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Flat Tow Wiring Kit For A 2019 Jeep Grand Cherokee
- Article: Troubleshooting Brake Controller Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)