Picking Out Replacement Hub/Drums and Brake Assemblies for 2005 Haulmark Low Hauler Trailer
Question:
Im trying to find what parts I need to replace my brake assembly, drums and bearings. The trailer is equipped with electric brakes. Thank you.
asked by: Henry B
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed. Once we know what hub you need we'll be able to pick out the correct brake assembly as well.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Trailer Coupler Repair Kit for Coleman Bayside Popup Camper
- Q&A: How To Add Electric Brakes to a 1995 Coleman Stony Creek Trailer
- Q&A: Replacement Coupler Repair Latch For A Coleman Casa Grande Popup Trailer
- Q&A: Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
- Q&A: Repair Kit for A-Frame Coupler on Coleman Pop-Up Camper
- Q&A: Will 10 Inch Trailer Brakes Fit In Place of 7 Inch Brakes
- Article: How to Charge RV Batteries
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 5 Things to Know About Weight Distribution Hitches