Replacement Hubs for 5,200/6,000 Lb Axle with 1.250 Outer and 1.750 Inner Bearing
Question:
I have measured my spindles according to the picture provided on many of your questions. I have the inner and outer diameter sizes and they are: 1.25 and 1.75. There seems to be two different options for hubs and drums for this size for the outer bearing one using a LM67048 and the other using a 15123. How do you determine what hub to use with these two combinations? Is the space between the bearing races the same?
asked by: James
Expert Reply:
I have great news, the 1.250" outer bearing diameter and 1.750" inner bearing diameter are very common so we have tons of great options. The Dexter Trailer Hub and Drum Assembly part # 8-201-5UC3 which has a 10-10 grease seal which is 2.125" or the Trailer Hub and Drum Assembly part # AKHD-655-6-K which has a GS2250DL grease seal which is 2.25". Then for the braking assemblies, you can use the Electric Trailer Brake Kit part # AKEBRK-6. If you just want an idler hub, the Dexter Trailer Idler Hub Assembly part # 8-213-5UC1 is correct and it comes with a 10-10 grease seal which is 2.125" but you can obtain the part # GS-2250DL for the 2.25" grease seal diameter.
The dimensions between the bearing will be the same as what you have now.
Products Referenced in This Question
etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Installation Of Hayes Air Actuated Trailer Brake Controller
- Q&A: Replacement Drum Assemblies for AL-KO 8490 Hubs
- Q&A: Recommended Tire Size for Upgrading Tires From 7.00-15LT on My Horse Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How Harvest Hosts Is Becoming the New Standard of the Camping Industry
- Article: How to Choose the Right Trailer Hitch Class