How to Determine Correct Replacement Grease Seal for 44251
Question:
replaced bearings on my trailer. Both sides have a sleeve made for seal surface.the seal number that was on the seal is 44251. In this vast wasteland called Utah, NOBODY has that seal.What say you????? bearings used were-Inner L68111 and L68149 Outer L44610 and L44649 #4 sombody looked up that number and gave me a National # 471801 but no body had that seal to check either.........................HELP
asked by: Chris O
Helpful Expert Reply:
The only reference I could find to a 44251 is that it is a "vintage" seal and there were no dimensions given, and the National 471801 seal seems to be an automotive seal that does not match any dimensions of trailer grease seals.
The bearing numbers you gave are consistent with a 3,500 lb axle so they make sense but there really is only one way to definitively determine the right grease seal for your trailer. What you will have to do is use digital caliper and measure your spindle to the thousandths of an inch where grease seal rides.
This will give you the inner diameter, which you can then match up with the right seal. I have added a link to our entire selection of seals for you to come back to once you know the diameter (you can filter your selection by diameter), as well as some help articles on bearings and seals.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Fit of Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1313 with my 2006 Dodge 3500 8 Foot Bed
- Q&A: Will Firestone Air Bags Interfere if I Install a B&W Gooseneck Trailer Hitch for a 2004 Dodge 2500
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision