Will Hardwiring in a Trailer Brake Controller Affect the Cruise Control on a 2011 Mitsubishi Pajero
Question:
red wire to brake switch ok with cruise control
asked by: W.mantle
0
Expert Reply:
I have not heard of any issues with the Mitsubishi Pajero (Montero), and the cruise control. You need to make sure that you have that red brake controller wire attached in the right place.
Use a circuit tester like # PTW2993 to test the wires on the brake switch above the brake pedal. You need the wire that shows a signal only when the brake pedal is pressed. If you find a wire that also has a signal with the headlights or running lights it is not the correct wire.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements