Installing Middle Jacks of Lippert Ground Control Where They May Interfere with Slide Out

Question:

If I put the bracket at 12 in. From the spring mounting bracket the jack bracket will hit the slide sprocket so if I move it back some it would be 9 in. From the spring bracket. So do I leave it at 9in. Or I could cut one ear off of the bracket but don’t know what that will do to bracket integrity or move the jack past the sprocket ?

asked by: John P

Expert Reply:

The 9 inch distance is fine and will work great for the center jacks of the Lippert Ground Control part # LC675817. Just make sure the other side has the jacks at the same dimension.

expert reply by: Jameson C