Replacement Bearings Races and Seals for a 1974 Midwest Boat Trailer
Question:
I have a 1974 Midwest boat trailer it is a single axle. I would like to change the wheel bearings both inner and outer with the races and seals. I have them removed and can not find any numbers on the bearings or races. The inner bearings are 1.25 inch ID the inner race is 2.30 OD. The outer bearings are .750 ID the race is 1.781 OD the outer race has a partial number LM 010 the first 0 may not be correct.
asked by: Jim W
Expert Reply:
Based on the measurements that you have provided, check out the outer bearing # LM11949 and race # LM11910. This bearing and race combinations has an inner diameter of .750 inches and an outer diameter of 1.781 inches.
For the inner bearing and race you will need bearing # LM67048 and race # LM67010. The inner diameter for this bearing and race combination is 1.250 inches and the outer diameter for race # LM67010 is 2.328 inches. We do not have a race with an OD of 2.30.
The grease seals that are compatible with inner bearing # LM67048 are the 10-10 grease seals # RG06-090. These seals have an inner diameter of 2.125 inches and an outer diameter of 3.376 inches. I have attached a link for each of the products that I have mentioned for you to check out.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Race for LM67048 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.328 Inch O.D.
- Bearing LM67048
- Race LM67010
- 5200 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Race for LM11949 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.781 Inch O.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Can Tubeless Tires be Used on a Tube Tire Trailer Wheel
- Q&A: Modern Tire Size Replacement for 6.9 - 9 Size
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: How to Pick Out a Replacement Grease Seal for a Trailer Hub
- Q&A: What is Widest Trailer Tire Size to Replace 5.30-12 Tire Size
- Q&A: How Much Taller is a 5.30-12 Trailer Tire Compared to a 4.80-12 Trailer Tire
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Article: Trailer Tire Sizing
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter
- Article: Measuring a Trailer Tire
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub