Can I Use the Bargman 30-85-002 to Replace the Tail Lights on my 1993 Winnabego warrior motorhome
Question:
I am replacing the existing taillight assemblies. It is a 4 function wire system grn. and blk.wiring with red lense. Blk. wire on center amber lense. Rev. blk. backup. Wht. ground. Is it possible to install a 30-85-002 5 function lighting assemble ?
asked by: Robert S
Helpful Expert Reply:
Yes. You can use the Bargman Triple Tail Light - 5 Function # 30-85-002 which has 5 wires, on the 4 wire system of your 1993 Winnebago Warrior. To do this you would just need to splice out the turn signal wire on your vehicle to allow you to provide power to the top two lights on the fixture and allow them to function properly.
For reference, the green wires are going to be for the taillights and the running light circuit, the black wires are going to be our stop and turn signal, the white wire will be your ground and the black wire on the reverse light will connect to the reverse light circuit on your vehicle.
These lights are also available with a black base using part # 30-84-509.
