Joining Air Lift Remote to Wireless Compressor Kit

Question:

Can you tell me how that's done I will try that first

asked by: Bernie H

Expert Reply:

What exactly does the display read on the remote? Does it possibly need to be joined to the compressor?

expert reply by: Jameson C

click to enlarge

Bernie H.

3/5/2020

Can you tell me how that's done I will try that first

Jameson C.

3/5/2020

I've attached the installation instructions and a clip on pairing the remote from the installation instructions for the Air Lift WirelessAIR Compressor System # AL72000. These instructions outline the pairing process between the manifold and the remote on page 16. You will want to set the manifold to "join" mode by grounding the yellow join wire and then cycling power to the manifold. The controller can be put into "join" mode by pressing the Up and Down buttons together, selecting the M1 button when the display flashes "JOIn" and then selecting either the front of rear axle. The installation instructions will offer greater detail to this process.

Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video