Hitch and Wiring Recommendations for 2017 Chevy Equinox
Question:
Will a tow package off a 2000 Sierra fit on a 2017 Chevy equinox
asked by: Rodney
Expert Reply:
The tow package parts, or towing equipment from a 2000 GMC Sierra will not fit a 2017 Chevrolet Equinox. The trailer hitch and wiring are designed differently for each application, however there is a solution to tow with your Equinox. I recommend the etrailer Trailer Hitch # e98865. I like the finish on this hitch more than other because it's a flat black so it blends in on the bottom really well and hides dirt and scratches easily. It's a custom fit hitch, so there's not drilling or cutting required to get it installed.
If you need wiring you can use T-One Vehicle Wiring Harness # 118264 if you have the tow package, and #118494 if not. The easiest way to tell if you have the tow package or not is to look for a plug on the driver's side of the rear hatch. The plug will be tucked behind the trim panel (the very back corner on the driver's side). If there is a gray connector that is open and not being used then it has the tow package.
For a ball mount I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 trailer hitch balls, and pins and clips so it can accommodate several different trailers.
I linked the products above as well as a few videos for you to check out of the install process.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >