Troubleshooting In-Bed 7-Way Trailer Connector on 2019 Ford F-350
Question:
The 7 wire plug on bumper is working but the plug for 5th wheel has no power
asked by: Glenn S
0
Expert Reply:
An aftermarket in-bed wiring harness like # 41157 installs by plugging inline between the factory harness and the factory 7-way mounted on the bumper as shown in the video I've linked for you. As the connector on the bumper is working okay, check the connection at the back of the in-bed 7-way. Make sure that plug is fully seated, some times that's a tight fit and you'll need to push really hard to make sure the plug and the harness are fully seated together.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight