Availability of Hub that Uses LM67045 1.25 Inch Inner and Outer Bearing
Question:
I have a older hub that use Lm67045 bearings inner and outer I.D. 1.25 I need a replacement hub
asked by: Dan M
Expert Reply:
I do have an option for you, however, we don't carry any hubs that use bearing number LM67045 for both the inner and outer bearings, or any hubs that use # 02475, # 14125A, # 15123 or # LM67048 (also 1.25 inch ID) for their inner and outer bearings.
From what I was able to find, this type of hub was used on 2,500 lb axles on marine or utility trailers dating back to the 1960's for which replacement parts are nearly impossible to find today.
Your best option is to replace your axle with a more standard one, like the 3,,500 lb Dexter Axle # 35545I-ST-89, which measures 89 inches hub face to hub face and 74 inches spring center to spring center and includes complete hubs with a 5 on 4-1/2 bolt pattern. If your axle's dimensions or wheel bolt pattern are different, please let me know and I will see if we have an axle that will work for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 02475
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 02475
- Race 02420
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Most Popular Wheel Bearings
- Q&A: Solution to Replace 8k Kodiak XL NevR Lube Hub Drums
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is the Length of the Trailer Idler Hub Assembly # TA88545-2
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Measuring a Trailer Tire