What Spindle Does Dexter 10K Hub Assembly # 8-214-5 Fit
Question:
Do these 10k lb hubs fit a specific # spindle? Like the 7k lb hubs fit #42 etc.
asked by: Sara
Expert Reply:
The Dexter Trailer Idler Hub Assembly # 8-214-5 that you referenced does fit a particular spindle but it's not something we have available (the highest capacity spindles we have are 6K units) and there's not really a standard model name for it like the # 42 spindle you mentioned that's typically found on 5,200 pound axles.
The Dexter Hub Assembly # 8-215-5 uses a # 395S inner bearing, a # 387A outer bearing, and the # 10-56 oil seal that has a 3.125" inner diameter and a 4.500" outer diameter. You will just need to make sure the spindles on your trailer (or the spindles you're looking to add) accept these bearings.
I have attached a short video review on this hub assembly that you can check out as well.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 3.125 Inch I.D.
- 4.500 Inch O.D.
- Redline
more information >
Replacement Trailer Hub Bearing - 387A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.250 Inch I.D.
- Bearing 387A
- Race 382A
- 10000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 395S
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.625 Inch I.D.
- Bearing 395S
- Race 394A
- 10000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 10,000-lb Axles - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 395S
- 387A
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub/Drum and Brake Assemblies for Dexter 12k Axle
- Q&A: Will Dexter Idler Hub for 12k Axles Fit Lippert Axle
- Q&A: Electric Trailer Brake Assembly for 10k & 12k Axle
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Will a Kodiak Hub Fit a 10,000 lbs Hayes Axle?
- Q&A: Drum Assembly For Dexter 9k to 10k Oil Bath Hub 008-430-03
- Q&A: Disc Brake Kit Recommendation for Dexter 10k Rated Trailer Axle
- Article: Ram Trailer Tow Prep Package
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)