Stripped Weld Nuts on 2008 Hyundai Santa Fe
Question:
Santa Fee 2008. Long story short, the bolts welded in the frame are stripped. They wont hold spec tork. They are too shallow for time-sert. I cant access bolts as frame is sealed at ends. Any suggestions?
asked by: Michel S
0
Expert Reply:
Without having any access to the inside of the frame, the only alternative would be to tap threads into the stripped weldnuts. You'd need to go up 1 bolt size, tap for a 12mm x 40mm bolt with a 1.25 thread pitch. You will need to use a grade 10.9 bolt.
expert reply by:
Mike L
0