2008 Honda Pilot Trailer Hitch and Wiring Recommendation

Question

Question:

Which hitch and a wiring harness will fit my 2020 pathfinder?

asked by: Trenton

0

Expert Reply:

For your 2008 Honda Pilot I recommend the etrailer Trailer Hitch Receiver # e98851 because of its simple installation and superior finish. What sets this hitch apart is the tough matte coating hides dirt, scuffs, and dings better than a traditional glossy finish. One thing you'll be glad you picked up is a nylon tube brush # 814092. There's plenty of gunk and road debris that can build up inside your weld nuts over the years, so you'll want to make sure you spray a good amount of lubricant and clean those out to save you precious time during installation.

The Tekonsha T-One Vehicle Wiring Harness # 118336 is your best option to add a 4-Pole flat trailer connector to your Pilot. The t-connectors plug right into your factory connectors behind your tail light so no cutting, splicing or tapping is required. When it comes to the built-in converter, Tekonsha harnesses are my top choice simply because they have proven to be the most reliable option.

To complete your towing package, take a look at the Curt Towing Starter Kit for 2" Hitches # C45534. The kit includes a ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.

I've attached installation videos for you as well on both my hitch and wiring recommendations for you.

expert reply by: Carla M

0

Answer 1

For your 2008 Honda Pilot the etrailer Trailer Hitch Receiver part #e98851 and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118336 are custom fit and will work perfectly on your Pilot. They are both easy to…

view full answer...

Answer 2

It's going to vary a bit depending on whether or not your rear suspension is worn or not, but in most cases a 2005 Honda Pilot with the etrailer Trailer Hitch #e98851 will sit 16-3/8" from the bottom of the hitch to the ground.…

view full answer...

Answer 3

The main differences between the available transmission coolers is the style of the coolers and the size. There are style that are more efficient that others, and obviously the bigger the cooler the more efficient it is as well. The tube-and-fin…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13397 is the same as the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"#e98848 regarding measurements and rated capacities. The…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

Thank you for your purchase of the etrailer Trailer Hitch Receiver #e98851. The issue with an exhaust/muffler coming into contact with a hitch isn't a wholly unusual one, but you'll need to examine the underside where the hitch is…

view full answer...

Answer 8

Yes, the exhaust hangers of your 2005 Honda Pilot do need to get removed to install the etrailer.com hitch part #e98851 that you referenced (and all other hitches that would fit your vehicle). The entire exhaust does not need get removed though as…

view full answer...

Answer 9

The Curt hitch for the 2004 Honda Pilot, part #13328, and the etrailer one, part #e98851, are almost the same. As you mentioned, the finish is the only difference between them. The matte finish of the etrailer one helps to prevent scratches and…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

2008 Honda Pilot Trailer Hitch and Wiring Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching