Can the Hubs Be Reused When Switching from Electric to Hydraulic Brakes On An AL-KO 10K Axle
Question:
Can you use the same hubs from your electric brakes on a 10,000 pound alco axle when you convert to hydrolic brakes?
asked by: Charles O
Expert Reply:
Generally speaking, you can reuse the hubs when switching from electric to hydraulic brakes or vice versa. There is no difference in the hub but you do need to be sure the braking assemblies are the same size. The Hayes/AL-KO Hydraulic Brake Kit part # K23-524-00-2 is my recommendation for hydraulic drum brakes and should work with your existing hubs no problem just be sure to verify the size of the drum and make sure it's 12-1/4" x 3-1/2".
If you can provide more info on the trailer such as the type (5th wheel, travel, etc.) and number of axles (tandem, triple etc.) I would be glad to provide a list of all other parts needed.
Product Page this Question was Asked From
Hayes/AL-KO Hydraulic Brake Kit - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- 12-1/4 x 3-1/2 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 12000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Oil Seal for 10K Quality Axles with Seal 27438
- Q&A: Recommended Replacement For A Dometic Duo-Therm Rooftop Unit
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: How to Store a Travel Trailer/Camper for the Winter
- Article: Trailer Tire Sizing
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Protective Case for NOCO Boost X Jump Starter
- Article: Trailer Wiring Diagrams
- Q&A: Converting Shorelandr Boat Trailer from Slipper Spring to Double Eye
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Q&A: What Diameter Holes are Required For The LED Trailer Mini Clearance Lights MCL10AKB & MCL11RKB?
- Q&A: What are the Dimensions of a #99 Spindle