Can Fifth Wheel Bed Rails Be Removed When Hitch is Not Being Used
Question:
I have a 2011 F150 6.5foot bed. When not camping I use the bed all the time for plywood, drywall, soil, etc. and absolutely need the full, flat, uninhibited, line-xed, bed when I take my 5th wheel hitch out. This includes mounting rails, bolts, any protrusions, etc. Will the Reese 15k slider with the RP50081-58 custom mounting kit allow me to achieve this? If not, could you point me in the direction of a rail mounting kit that would meet this criteria. Thanks!
asked by: Jeff
Expert Reply:
When the Reese 5th wheel hitch is removed from the bed rails, the rails will remain in the truck bed. Once the rails are installed by bolting them through the bed to the frame brackets and tightened to their specified torque, they need to remain in place. Removing the bed rails repeatedly would cause undue stress on the mounting hardware thus weakening it, which is why the hardware is rated for a one-time use only.
Using the Reese Elite Series Under-Bed Rail and Installation Kit, part # RP30064 and the Reese Elite Series 18K Sliding Fifth Wheel Hitch, part # RP30144 will allow your bed to remain almost completely free of obstructions once the hitch is removed. The hitch would install using the 4 pucks that are set into the bed, as shown in the photo I have edited for you. As you can see, the pucks (which include plugs to keep debris out of them) are far less obtrusive in the truck bed than the standard bed rails. The RP30144 also includes a fifth wheel wiring harness for the truck bed.
Given your requirements, I believe the under-bed mounts and hitch would be the best choice for you. If you click the provided link, you can see installation details for the under bed rail kit.
For install details, click the provided links.
Product Page this Question was Asked From
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Shop: 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long
- Shop: Base Rails for Demco SL Series 5th Wheel Trailer Hitches
- Shop: Custom Installation Kit w/ Base Rails for Demco SL Series 5th Wheel Trailer Hitches
- Q&A: Availability of Fifth Wheel Hitch to Fit Older Style Fifth Wheel Rails that Run Parallel to Frame
- Shop: Fifth Wheel Hitch
- Search Results: pace trailer parts
- Search Results: lug nut
- Search Results: trailer wheel lug nuts
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Q&A: What Is The Difference Between the 6K and 7K Dexter Axle Electric Brake Assemblies
- Q&A: What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Video: B and W Hitch Adapters - Hitch Reducer - BWRHXA2182 Review
- Video: B and W Hitch Receiver Reducer Sleeve Review BWRHXA2182
- Video: Curt Hitch Receiver Reducer Sleeve Review
- Video: Curt Hitch Adapters - Hitch Reducer - C45405 Review
- Shop: Camper Tie-Downs
- Shop: RV Mattress
- Shop: Base Plate for Tow Bar
- Video: Review of Reese 20K Fifth Wheel Hitch Head - 30118
- Q&A: Above vs Below-Bed Hitches and Recommended Hitch for 2018 Ford F-350 with 6.75-Foot Bed
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-7-D Review
- Video: B and W Companion OEM 5th Wheel Hitch Installation - 2020 Chevrolet Silverado 2500 BWRVK3710
- Search Results: grease
Stan M.
8/9/2020
We have sold our 5th wheel and want to remove the hitch totally from the bed of our truck including the rails. I would like to know how to do this and if it will damage the integrity of my truck. I plan on selling the hitch..Thanks for any info