Can 7,000 Pound Hub and Drum with 8 on 6-1/2 Bolt Pattern Fit 5,200 Pound Axle
Question:
do you have a 5200 lb axle to fit this hub? I have spoke to 1 person that says it will work, and 2 people that say it wont?? I just read online, one of your forums, while researching this that it will work.
asked by: Wayne A
Expert Reply:
Dexter hubs # 8-219-4UC3-EZ can fit a 5,200 pound axle, but not as they come.
The 5,200 pound axles, like part # 8327816 as an example, use # 25580 and # LM67048 for the inner and outer bearings respectively. The hub uses # 14125A for the outer bearing which has the same inner diameter (1.25 inches) as # LM67048 so that's not an issue. The problem is the grease seal. The hub includes # GS-2125DL for the seal which measures 2.125 inches inner and 3.376 inches outer. The axles need a seal that measures 2.25 inches inner. So with that being said you can fit the hubs onto the 5,200 pound axle if you replace the seal with part # RG06-070 that has the same 3.376 outer diameter but has a 2.25 inch inner diameter to fit the spindles on the axle.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- Dexter
more information >
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Axle Nut And Tang Washer For A Dexter 10K Axle Made In 1999
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Studs for a Trailer Hub and Drum Assembly # 42866UC3-EZ
- Q&A: Will Replacement Hub and Drum Assembly for Dexter 008-219-04 Fit Dexter Axle 8327834
- Q&A: Troubleshooting a Lippert Level-Best Leveling System that Suddenly Stopped Working
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Q&A: Recommendation for Failing EZ Lube Spindle and Vortex Hub