bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement 6 Bolt Agricultural Hub for 1978 John Deer Implement Trailer  

Question:

Hub is off of implement trailer purchased from John Deere in 1978 hub is broke and need a replacement bearing size is outer urb lm67048 inner bearing size is urb 25580 seal number can’t read but crossed on at Napa with skf. 21352.

1

Helpful Expert Reply:

Given the bearing numbers and the fact that it's a 6 bolt hub, you're needing the Dexter # 42660UC1 Agricultural hub. The bearings, races and seals are sold separately. You'll need the # 25580 inner bearing, the # LM67048 outer bearing, the # 25520 inner race and the # LM67010 outer race. The grease seal we carry that cross-references to the SKF 21352 is part # GS-2125DL.

This hub is typically used with the # GS-2250DL grease seal, so I'd recommend you use a digital caliper on the surface of the spindle where the grease seal rides. The # GS-2125DL seal has an ID of 2.125 inches while the # GS-2250DL has an ID of 2.250 inches (both have the same OD), so you'll want to measure to ensure you get the correct one.

expert reply by:
1
Mike L
Ask The Experts a Question >>

Products Referenced in This Question








Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>