Locating Replacement Wobble Rollers for 23 Foot Load Rite Trailer
Question:
I going to replace all my rollers on my 23 ft load rite I measured them the size I got was. 4 7/8 in high 3 1/2 wide. Inside 1.1/8 What size I need. And can I use 5 inch high
asked by: Steve J
Expert Reply:
The closest option we have to the dimensions you listed for your existing rollers is the CE Smith Ribbed Wobble Rollers # CE29210. These will fit your 1-1/8" shaft but they feature a 5" diameter and a 3" width, varying slightly from what you currently have.
The slightly larger height/diameter shouldn't be an issue at all but you will just want to make sure you are okay losing a 1/2" of surface contact with the boat with these narrower rollers. Otherwise these will physically fit and work well as replacements, especially since it sounds like you plan on replacing all your rollers.
I have attached a short video review on this product that you can check out as well.
Product Page this Question was Asked From
CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Black Rubber
- Fits 3/4 Inch Shaft
- Fits 1-1/8 Inch Shaft
- CE Smith
more information >
Continue Researching
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 3/4" Shaft
- Shop: CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE29210 Review
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-6P Review
- Q&A: Bearing Bushing Length of Yates Wobble Roller # YR530R-6P
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 5/8" Shaft
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 7/8" Shaft
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-5P Review
- Q&A: Replacement Wobble Rollers 5 Diameter, 3 Wide For a 3/4 Shaft
- Q&A: Inner Width of Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 3/4" Shaft
- Q&A: Do the CE Smith Ribbed Wobble Rollers for Boat Trailers Require Lube
- Q&A: Replacement Guide On or Roller for Yarborough Boat Trailer
- Q&A: 3 inch Wide by 5 inch Diameter Wobble Roller Designed for 3/4 inch Shaft
- Q&A: Replacement Boat Trailer Rollers That Fit 3/4" Shaft
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-7P Review
- Shop: Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 5" Diameter - 1" Shaft
- Shop: CE Smith Wobble Roller Retainer Ring - Zinc-Plated Steel - Qty 1
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR530R-8P Review
- Video: Review of CE Smith Wobble Roller Retainer Ring - CE10981
- Search Results: rollers
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR500YW-6P Review
- Shop: Trailer Hitch
- Search Results: 25580
- Search Results: bwts10037b
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Search Results: jack
- Search Results: 395s
- Shop: Gooseneck Hitch