Center Bore Diameter For The AKIHUB-440-2-1K Idler Hub Assembly
Question:
Hi, I want to do a ATV trailer with the walking beam system. I have 4 tires 24x9.00-11 and wheels from my old ATV. The pattern of my wheel is 4 lugs 110mm, so I bought a 1foot thick wheel adapter to make it fit to 4 lugs 4 inch that will fit with this hub. The center bore diameter of my wheel is 2 3/8 inch...and I want to know if this hub have a smaller bore diamater than that. Thank you!
asked by: Dave D
Helpful Expert Reply:
The center bore diameter for the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-1K measures 2-5/16" from outside to outside. Included are additional video resources as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: How to Measure a Trailer Axle
- Q&A: Replacement A-Frame Trailer Coupler For 1978 Airstream With 50 Degree A-Frame
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Maintenance Schedule