Where are the Wires Located to Power the Pop and Lock Tailgate Lock on a 2011 Toyota Tacoma
Question:
Ive installed everything up to finding the correctg wiresto tie into behind the kick plate. As there are several connections, harnesses, etc connecting to the door harness, exactly where will I find the blue/black and black /red wires I need to tie into? Are they running from the door and connection to the remainder of the harness or are they after the connection? there are a lot of conenctions right after the door harnees comes into the cab and not a lot of room to manuever. Thanks.
asked by: Chuck M
Expert Reply:
I spoke with my contact at Pop and Lock and was told that you should locate the wiring harness that goes into the drivers side door and attach one wire to the blue wire with red stripe wire and the other wire to the blue with black stripe wire, on your 2011 Toyota Tacoma 2 door model.
There should only be one harness exiting the kick panel area and continuing on into the drivers side door.
Product Page this Question was Asked From
Pop & Lock Custom Tailgate Lock - Power - Black
- Tailgate Locks
- Lock Only
- Power Lock
- Keyed Alike
- Vehicle Specific
- Black
- Pop and Lock
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Pop & Lock Tailgate Lock For A 2015 Toyota Tacoma With Tailgate Camera
- Q&A: Compatibility of Pop & Lock Tailgate Lock System with Factory Backup Camera
- Q&A: Keying A Pop & Lock Tailgate Lock To A 2011 Toyota Tacoma Ignition Key
- Q&A: How To Convert 2015 Toyota Tacoma with Backup Camera to Power Locking Tailgate
- Q&A: Distance from Upright Mast of Brophy Camper Jack to Bracket that Holds Camper
- Q&A: Locking Tailgate Handle for a 2015 Toyota Tacoma with Backup Camera
- Q&A: Power Tailgate Lock Kit for 2004 Toyota Tacoma with Power Door Locks