Will Americana 13" Spoke Trailer Wheel Fit 4 on 3-1/8" Bolt Pattern
Question:
I bought an old dual axle 5 foot X 8 foot trailer that has a 13 inch wheel and a 4x3 1/8 inch bolt pattern. Can I still get these wheels?
asked by: John
Expert Reply:
I believe you are referring to the 13" Steel Spoke Trailer Wheel # AM20224 that has the 4 on 4" bolt pattern. From what you said I'm guessing that you measured inside to inside for the bolt holes because I've never heard of a 4 on 3-1/8" bolt pattern. Since you have a 4-bolt pattern you need to measure from the center of one bolt hole directly across to the center of the bolt hole across from it. This should measure 4" which would mean that you have a 4 on 4" bolt pattern.
Attached is a review video you can check out where we go over this measurement.
Product Page this Question was Asked From
Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Galvanized
- Trailer Tires and Wheels
- Wheel Only
- 13 Inch
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Americana
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Torque Specs for a 13 Inch Boat Trailer Wheel
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Wheel Recommendation for 13 By 4.5 Wheel
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: When Should You Replace The Valve Stems On Your Trailer
- Q&A: Availability of 13 Inch Wheel with 4 on 4-1/2 Inch Bolt Pattern
- Q&A: Choosing The Correct Hub And Spindle For Your 2,000 Lb Axle
- Q&A: Wider Tire Replacement for a 145/R12 Trailer Tire
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Store a Travel Trailer/Camper for the Winter
- Article: 5 Things to Know About Weight Distribution Hitches
Lee
5/19/2020
I need a replacement wheel. The diameter is 6". The bolt pattern is 4 on 3 1/8". Yes I said that right. Not a 4 on 4. It goes on an older go kart. I measured center of bolt to center of opposite bolt.