Size of Trailer Wire Mounting Clip
Question:
What is the size of this clip? As you have not listed length / width, max wire capacity, frame depth etc. Thank you.
asked by: Brian S
0
Expert Reply:
The height of this clip is 1-1/2 inches, width is 1/2 inch, width for wire capacity is 3/8 inch and the frame depth is 5/16 of an inch. Constructed of spring steel and has a black enamel finish.
expert reply by:
Robert G
0
Product Page this Question was Asked From
Continue Researching
- Video: Redline Wiring - Tools for Wiring - 464600 Review
- Q&A: Thickness of Metal The Redline Wire Frame Clip Works With.
- Shop: Wire Frame Clip
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2 - LR C
- Shop: Replacement Wire Clip for Magnet Lead Wire on Brake Assemblies
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Search Results: leaf spring
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Trailer Wiring
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Shop: Brake Controller
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: lug nut
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Search Results: 90160
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Gooseneck Hitch
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: equalizer
- Shop: Suspension Enhancement
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Article: Trailer Wiring Diagrams
J.p
4/29/2020
When you say frame depth is 5/16 are you referring to the thickness of the metal it would attach too? I have 1/4 thick angle iron that I need to attach to, will this work?