Are the Wall Mounts on Gustafson RV LED Interior Lights Interchangeable
Question:
I have a 2010 Phaeton. I removed the bulbs to replace the 1076 with led eq. I cant install the bulbs because they would not twist to lock in. I reinstalled original bulbs and had the same problem. What am I doing wrong. The slots line up but will not click in when I push in and twist. Also I cant remove the covers to try to give myself more room. Also if I decide to replace the fixtures with your reading lights can I get them with rectangle wall mounts or are the mounts interchangeable. My current mounts are black. Thanks in advance.
asked by: Richard M
Helpful Expert Reply:
It's tough to say exactly what you're doing wrong here, because with bayonet style light bulb bases you should simply line up the pins, push the bulb in and twist clockwise to install new bulbs- which seems to be the process you're following.
If the pins aren't catching a slot and allowing you to twist you may just not be pushing hard enough; I know we just changed out some LED lights on a fixture in our house and it really did seem like we weren't going to get them to fit. Ultimately we kept at it and pushed a bit harder and were able to get the "click"- I know it might seem like the bulb may break, so you'll have to be careful, but those LED lights are fairly strong.
As for the Gustafson RV LED Reading Light # 277-000335 , these are a solid 1-piece light so you wouldn't be able to switch out the bases of them; doing so would void any warranty that they include as well as it being against UL regulations.
Product Page this Question was Asked From
Gustafson 12V RV LED Reading Light - 5-3/4" Tall - Black
- RV Interior Lights
- Reading Light
- Warm White
- Switch
- Surface Mount
- LED Light
- 12V
- 3-1/2L x 3-1/2W Inch
- Black
- Gustafson Lighting
more information >
Continue Researching
- Q&A: Surface Mounted LED Lights for RV to Replace Command # 001-1050 and # 001-1051
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What Gauge Wiring Is Used On the 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB?
- Q&A: Why Wouldn't Demco Wireless LED Tow Bar Lighting Kit DM36MV Work with Mercedes Sprinter
- Q&A: Can The Light Bulbs In Gustafson Reading Lights Be Changed Out For Brighter Bulbs
- Article: Flat Towing Package for 2010-2011 Jeep Liberty
- Q&A: Replacement 16 Inch Wheel Recommendation for Lionshead Lynx Silver Wheel with 8 Lug Pattern
- Q&A: Can Wireless Towed Vehicle Lights Be Used with Tow Dolly Lights
- Q&A: How is the 7 Way Plug on the Custer Wireless LED Tow Bar Light Wired
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Drain an RV Water Heater