2016 Ford F-150 Sags When Attached to Horse Trailer with Living Quarters
Question:
Hi I have 6000 to 8000 pound horse trailer that I am towing with my Ford 2016 F150 eco boost truck. The trailer empty is 4500 lbs and the tongue wt with the empty trailer is 1500# My back end is seriously sagging. Hitch place recommended super springs but I think I need a weight distribution bar as well. Also, when the horse gets loaded the tongue wt decreases, but I need to tow with an empty trailer as well.
asked by: Lisa
Helpful Expert Reply:
In order to prevent sagging while towing with a 2016 Ford F-150 I do recommend a weight distribution system, the Curt TruTrack Weight Distribution System part # C17501 is one of the best options for the money and would be suited for your tongue weight range. I understand the trailer will have less tongue weight when the horses are loaded but the Curt TruTrack has a pretty large range so you should not have any issues though you would need to readjust the system to get the best performance. The Curt TruTrack also has four point sway control so in addition to load leveling you will receive increases in stability as well. Please pay no attention to the gross trailer weight ratings of the system as tongue weight is what really matters.
I recommend trying out the Curt TruTrack first to see if any additional support is needed as chances are it would not require any. That said, if you still need more support the SuperSprings Custom Suspension Stabilizer part # SSA28 are a good option. Please note, the Curt TruTrack is very easy to install and you will want to familiarize yourself with the system so I do recommend installing this yourself.
Products Referenced in This Question
SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Leaf Springs
- Light Duty
- SuperSprings Intl
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Why is There Wide Tongue Weight Range for Curt Weight Distribution System part # C17501
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Correct Curt TruTrack Weight Distribution System for 10,000 Lb Trailer
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Q&A: Eliminating Trailer Bounce When Towing And Using Weight Distribution System
- Q&A: Will Curt TruTrack Weight Distribution C17501 Work on a Trailer with 7,294 Pound Dry Weight
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500